Match Pistol Header

Tesro PA10-2 Basic Match Air Pistol

Product Description


Caliber 0.177
Trigger Weight 500g
Weight 970g
Dimensions(L/W/H) 404mm/50mm/134mm
Sight Radius 346mm or 364mm
Front Sight 4.0 mm / 4.5 mm
Barrel Length 235mm

£1020.00

Approx 14 Days delivery

The TESRO PA10-2 Basic is equipped with these standard features:

  • Adjustable 3D-Grip
  • PA10-2 Basic Compensator
  • Two gas release holes in the barrel
  • Continuously adjustable rear sight width
  • Large loading breach
  • Cocking lever usable from both sides
  • 200bar / 300bar pressure technology
  • Precisely adjustable pressure point trigger
  • Incl. basic guncase
  • Setable to dry firing

The PA10-2 Basic is equipped with a continuously adjustable rear sight. The sight width adjustments are very easily performed in order to adapt to different lighting conditions.

The cocking and loading of the PA10-2 series is handled with a double sided stainless steel cocking lever. The pellet is always positioned in exact position in the barrel by the cocking pin.

Due to its versatile adjustments, the 3D grip enables the shooter for best possible position of the pistol‘s line of sight. The grip is available in sizes S-M-L for right handed, as well as size M for left handed shooting.

The compensator of the PA10-2 Basic leads the air which propels the pellet through the stainless steel jack opposite of the shooting direction . In doing so the detoured air is used to stabilize the weapon vertically.

In addition the barrel is equipped with two gas release holes, which influence the movement of the air after leaving the barrel in a positive way.

The shot development time of the PA10-2 Basic is very short, due to very close proximity of the pres¬sure regulator to the barrel. The unit is capsuled and is therefore well protected against potentially external damaging factors.

Tesro PA10-2 Basic Compact Match Air Pistol

Product Description

Caliber 0.177
Trigger Weight 500g
Weight 950g
Dimensions(L/W/H) 370mm/50mm/134mm
Sight Radius 316mm or 334mm
Front Sight 4.0 mm / 4.5 mm
Barrel Length 207mm

£1020.00

Approx 14 Days delivery

The TESRO PA10-2 Basic is equipped with these standard features:

  • Adjustable 3D-Grip
  • PA10-2 Basic Compensator
  • Two gas release holes in the barrel
  • Continuously adjustable rear sight width
  • Large loading breach
  • Cocking lever usable from both sides
  • 200bar / 300bar pressure technology
  • Precisely adjustable pressure point trigger
  • Incl. basic guncase
  • Setable to dryfiring

The PA10-2 Basic is equipped with a continuously adjustable rear sight. The sight width adjustments are very easily performed in order to adapt to different lighting conditions.

The cocking and loading of the PA10-2 series is handled with a double sided stainless steel cocking lever. The pellet is always positioned in exact position in the barrel by the cocking pin.

Due to its versatile adjustments, the 3D grip enables the shooter for best possible position of the pistol‘s line of sight. The grip is available in sizes S-M-L for right handed, as well as size M for left handed shooting.

The compensator of the PA10-2 Basic leads the air which propels the pellet through the stainless steel jack opposite of the shooting direction . In doing so the detoured air is used to stabilize the weapon vertically.

In addition the barrel is equipped with two gas release holes, which influence the movement of the air after leaving the barrel in a positive way.

The shot development time of the PA10-2 Basic is very short, due to very close proximity of the pres¬sure regulator to the barrel. The unit is capsuled and is therefore well protected against potentially external damaging factors.

Tesro PA10-2 PRO Match Air Pistol

Product Description

Tesro PA10-2 Pro Match Pistol
Caliber 0.177
Trigger Weight 500g
Weight 965g or 1050g
Dimensions(L/W/H) 404m/50m/134m
Sight Radius 330mm or 346mm or 364mm
Front Sight 4.0 mm / 4.5 mm
Barrel Length 235mm

£1270.00

Approx 14 Days delivery

The TESRO PA10-2 PRO is equipped with these standard features:

  • Double-chamber-compensator
  • Fluted precision-barrel
  • Two gas-release holes in the barrel
  • Continuously adjustable rear sight
  • Large loading breach
  • Cocking lever usable from both sides
  • 200bar/300bar air pressure technology
  • Precisely adjustable pressure point trigger
  • 3D-Grip
  • Incl. form fitted guncase
  • Setable to dry firing

The PA10-2 PRO is equipped with a continuously adjustable rear sight. The sight width adjustments are very easily performed in order to adapt to different lighting conditions.

The cocking and loading of the PA10-2 series is handled with a double sided stainless steel cocking lever. The pellet is always positioned in exact position in the barrel by the cocking pin.

Due to its versatile adjustments, the 3D grip enables the shooter for best possible acquisition of the pistol‘s line of sight. The grip is available in sizes S-M-L for right handed, as well as size M for left handed shooting.

The specially designed double-chamber-compensator of the PA10-2 PRO ensures to lead away the air used to accelerate the pellet. This also stabilizes the barrel movement after the pellet leaves and prevents disruptive swirl.

The PA10-2 PRO is equipped with an exclusive, fluted precision barrel. The fluted barrel enhances the acceleration of the pellet, without causing any stability loss at the same time.

The TESROs standard 300 bar enabled cylinder filling technology offers the shooter the best equipment and therefore supports the filling methods for 200bar and 300bar.

Tesro PA10-2 PRO Compact Match Air Pistol

Product Description

Tesro PA10-2 Pro Compact Match Pistol
Caliber 0.177
Trigger Weight 500g
Weight 945g or 1030g
Dimensions(L/W/H) 385m/50m/145m
Sight Radius 300mm or 316mm or 334mm
Front Sight 4.0 mm / 4.5 mm
Barrel Length 207mm

£1270.00

Approx 14 Days delivery

The TESRO PA10-2 PRO is equipped with these standard features:

  • Double-chamber-compensator
  • Fluted precision-barrel
  • Two gas-release holes in the barrel
  • Continuously adjustable rear sight
  • Large loading breach
  • Cocking lever usable from both sides
  • 200bar/300bar air pressure technology
  • Precisely adjustable pressure point trigger
  • 3D-Grip
  • Incl. form fitted guncase
  • Setable to dry firing

The PA10-2 PRO is equipped with a continuously adjustable rear sight. The sight width adjustments are very easily performed in order to adapt to different lighting conditions.

The cocking and loading of the PA10-2 series is handled with a double sided stainless steel cocking lever. The pellet is always positioned in exact position in the barrel by the cocking pin.

Due to its versatile adjustments, the 3D grip enables the shooter for best possible acquisition of the pistol‘s line of sight. The grip is available in sizes S-M-L for right handed, as well as size M for left handed shooting.

The specially designed double-chamber-compensator of the PA10-2 PRO ensures to lead away the air used to accelerate the pellet. This also stabilizes the barrel movement after the pellet leaves and prevents disruptive swirl.

The PA10-2 PRO is equipped with an exclusive, fluted precision barrel. The fluted barrel enhances the acceleration of the pellet, without causing any stability loss at the same time.

The TESROs standard 300 bar enabled cylinder filling technology offers the shooter the best equipment and therefore supports the filling methods for 200bar and 300bar.

Tesro PA10-2 SIGNUM Match Air Pistol

Product Description

Tesro PA10-2 SIGNUM Match Pistol
Caliber 0.177
Trigger Weight 500g
Weight 1000g or 1080g
Dimensions(L/W/H) 404m/50m/134m
Sight Radius 330mm or 349mm or 368mm
Front Sight 4.0 mm / 4.5 mm
Barrel Length 235mm

£1270.00

Approx 14 Days delivery

The TESRO PA10-2 Signum is equipped with these standard features:

  • Adjustable 3D-Grip
  • Repeatable adjustable sight length
  • Continuously adjustable rear sight
  • Precisely adjustable pressure point trigger
  • Hand sharpened sears
  • Setable to dry firing
  • 200bar/300bar air pressure technology
  • Compensator with inserted separator
  • Radial relieved precision-barrel
  • Two gas-release holes in the barrel
  • Incl. form fitted guncase
  • Large loading breach
  • Cocking lever usable from both sides

The barrel of the PA10-2 Signum has a machined area on the outer surface, which provides an enhancement of the acceleration of the pellet. This effect will reduce the required energy per shot and increase the balance of the pistol.

All TESRO air pistols of the PA10-2 series are equipped with the precision trigger. Because of the hand sharpened sears, a precise and clean release of the shot can be assured.

The PA10-2 Signum is equipped with a compensator with a specially inserted stainless steel diffuser. It ensures an efficient diversion of the air away from the pellet.

The optional weight bar can be equipped with additional movable weights in order to adjust the balance of the weapon to the corresponding shooter.

With the PA10-2 Signum TESRO offers the first time a match air pistol that is equipped with a barrel sleeve and combines all advantages of previous models in this new premium version. With the Signum variant, the shooter has a choice of the colour of the system.